News

   Tel: 0757-28386038
   Web: www.hdhes.com
   Add: 廣東佛山順德區國家高新開發區
   (容桂高黎)科苑一路3號

0757-28386038

Industry information

  • CNC machine maintenance and maintenance

    2018-4-11CNC machine maintenance and maintenance

  • Different grades of CNC milling machine main functions

    2018-4-11Different grades of CNC milling machine main functions

    CNC milling machine should generally have three coordinate or more linkage function, can perform linear interpolation and circular interpolation, automatic control of the rotation of the milling cutter relative to the workpiece movement for milling, as shown in the figure. The greater the number of coordinate linkage axes, the lower the requirements for the clamping of the workpiece and the greater the processing range....+Read more
  • What are the requirements of the working environment for precision CNC equipment and ordinary CNC machine tools?

    2018-4-11What are the requirements of the working environment for precision CNC equipment and ordinary CNC machine tools?

    Precision numerical control equipment generally has the requirements of a constant temperature environment. Only at constant temperature conditions can machine precision and machining degrees be ensured. General general-purpose numerically-controlled machine tools have no specific requirements for the room temperature, but a great deal of practice shows that when the room temperature is too high, the failure rate of the numerical control system greatly increases....+Read more
  • The basic principle of AGV trolley and its use in factories

    2018-4-11The basic principle of AGV trolley and its use in factories

    The Automated Guided Vehicle (AGV) is an automatic guided vehicle with electromagnetic or optical, which can be run along pre-predetermined paths, and has a function of programming and selecting stop points according to application requirements. The basic components of AGV can be divided into: frame, battery, guide unit, vehicle charger, safety device, vehicle controller, communication unit, precise positioning device, working platform and so on....+Read more
  • What are the requirements for power supply of CNC equipment?

    2018-4-11What are the requirements for power supply of CNC equipment?

    The voltage fluctuation of the power grid should be controlled between +10% and -15%, while the power supply fluctuations in our country are large and the quality is poor. It also hides such disturbances as high-frequency pulses, plus human factors (such as sudden power failure) Wait)....+Read more
  • How to divide the CNC machining process?

    2018-4-11How to divide the CNC machining process?

    The tool centralized division method is to divide the process according to the used tool, and use the same tool to finish all the parts that can be completed on the part. Use the second knife and the third to complete other parts that they can complete. This reduces the number of tool changes, compresses the idle time, and reduces unnecessary positioning errors....+Read more
  • What is a CNC machine tool? Composition of CNC machine tools

    2018-4-11What is a CNC machine tool? Composition of CNC machine tools

    Numerical Control Machine Tools (referred to as Numerical Control Machines) is a control technology that applies digital computing technology to machine tools. It expresses various control information in the machining process with coded numbers and inputs the numerical control device through the information carrier....+Read more
吉祥彩票平台注册
<acronym id="wgk0a"></acronym>
<tr id="wgk0a"><xmp id="wgk0a">
<option id="wgk0a"><xmp id="wgk0a">
<wbr id="wgk0a"><optgroup id="wgk0a"></optgroup></wbr>
<wbr id="wgk0a"><xmp id="wgk0a"><rt id="wgk0a"></rt>
<rt id="wgk0a"></rt>
<acronym id="wgk0a"></acronym>